ทำไมซับวูฟเฟอร์ของ PROCELLA AUDIO จึงเหนือกว่าซับวูฟเฟอร์อื่นๆ

Ultra-Fast Transient Response
Extension to Subsonic Frequencies
Dual-Driver Configuration
Powerful Class-D Amplification: Onboard or Outboard Rack-Mount
DSP Control for Room Boundary Conditions
Lightning-fast and powerful, Procella subwoofers are designed for one purpose: the accurate, undistorted reproduction of bass. Lots of bass, pure and undiluted, with superb transient response and sufficient headroom to reproduce the challenging dynamic range of todays 96/24 recordings at reference levels.
Designed to professional audio reference standards, three dual-driver subwoofers and a single-driver room balancing subwoofer combine uncompressed high output with audiophile-standard musical articulation, to ensure accurate reproduction in any room from compact home theaters to professional screening rooms and small cinema environments.
Deep Bass and Superior Transient Response
All Procella subwoofers use sealed box designs for ultra-quick bass and powerful, long-throw woofers for extended deep bass down to subsonic frequencies.
Onboard Class-D Amplification with 28-bit ADI Sigma DSP
Procella gives you the choice of onboard or rack-mounted high-efficiency green class-D amplification for all Procella subwoofers (except the P10Si balancing subwoofer, which does not have the onboard option). With superior audio quality, the onboard amplifiers have 28-bit ADI Sigma DSP control for optimal performance, and provide four user-selectable EQ programmes to achieve optimal low-frequency response, based on the placement of the subwoofer in the room.
Outboard Amplification with Procella DA-2800DSP Professional Power Amplifier
In systems where it is desirable to place the amplifiers in the rack or to avoid having amplifiers behind a screen or wall, each Procella subwoofer model is available without an onboard amplifier. In place of the amplifier is a flat panel with a set of binding post inputs for each subwoofer driver. The P18-FP, P15-FP and P10-FP subwoofers are designed to be used with the Procella DA-2800DSP Power Amplifier, and are identical to the standard version subwoofers except for the fact there is no amplifier located in the speaker enclosure.
The P18-FP requires all four channels of the DA-2800DSP in bridged configuration, doubling the power of the standard P18 by driving each 18" subwoofer with 1,400 Watts!
The P15-FP and P10-FP require only one channel of the DA-2800DSP, producing a total of 700 watts (the same as the standard versions) when the drivers are connected in parallel.